February 10, 2021
Date: Webinar was held on 10 February, 2021
Registration is required to watch the recording.
Watch the recording of the joint webinar by BETA CAE Systems and DATADVANCE to discover the benefits of parametric mesh morphing in optimization studies compared to the typical CAD-based parameterization of geometry modifications.
Advantages of morphing in ANSA preprocessor by BETA CAE Systems and optimization problem solution in pSeven platfrom by DATADVANCE are shown at an example of optimizing mass of a front axle beam of a bus with 8 geometry parameters, stress and displacement constraints.
A live demo of the test problem solution includes a detailed demonstration of each step:
Flexible post-processing in META and results analysis conclude the demonstration.